Heat Molding Kit
The perfect kit for when you want to custom mold your ski boots. Use the foam parts of the Patriot Fit Kit to alleviate common pressure points in your ski boots.
Use one pair the socks on your feet and the other fill with rice as the heating method to distribute heat evenly through your liners for molding (Bonus is, you still have an extra pair of awesome socks to ski with afterwards!)
Great for the heat molding process of just your liners or both your liner and shells.
Check out the video below for detailed instructions:
Warning: Not all ski boots are heat moldable. You must ensure your boots are compatible with this process. Extreme care and attention is required to not melt your boots. Do not get your boots too hot or heat them up for too long. Results are highly dependant on your oven.
S M L
Boot 22.0-24.5 Boot 25.0-27.5 Boot 28.0-30.5
Euro 35-38 Euro 39-42 Euro 43-46
US 4-7 US 7-10 US 10-13
Between 1-10 days dependant on where you are located, but we have 2 shipping locations to make sure we get your gear to you as quick as possible.
We ship anywhere in the world at the best possible rates:
USA - Free
Australia / NZ - Free
Canada (over $100) - Free
Standard - $10
International (over $100) - Free
Standard International - $30
If any of our products do not work for you, we will buy them back. Simply send back your product to either our USA or Australian locations. If you selected the wrong size, no problems. We will cover the return shipping.
Return to USA location - Patriot Footbeds, Returns Department, 807 Airport Access Road, Unit D, Traverse City, MI 49686. Please include a copy of your packing list with the shipment.
Return to Australia Location - Shop 12 Town Centre, Jindabyne, NSW, 2672 Please include order number with product for reference.
Just get in touch for the best solution - firstname.lastname@example.org
Share this product
Shipping from Australia to the United States was much faster than I expected, especially during the holiday season! This kit along with the video from patriot foot beds that I found online or just what the doctor ordered. My boots finally fit as they should!
Be a better skier
A full Shock absorbing Footbed!
The premium EVA foam we use in our footbeds provides the ultimate in impact resistance. Designed to cushion the stresses exerted on the feet while skiing. Our footbeds are completely lined from toe to heel.
It is also double layered under the heel to eliminate heel strike when landing. Patriot gives you the confidence and ability to send it bigger!
Support and Alignment
By correcting your stance to a neutral position you will be primed to ski at your best. Your boot will fit as it was intended. You will be biomechanically efficient and you will achieve greater control and faster reaction to your skis.
Securing your foot in your boot allows you to transfer all your power completely whilst preventing toe and shin bang! When pain free, you will be able to progress your skiing to the next level.
Well known for its thermal insulation properties, the EVA material provides an increase of the heat retention inside your ski boots.
Completely reinforced throughout the 3 arches and heel, your feet will be balanced and stabilized. Adapting to many feet types and moldable for a precise fit.
Located in the best position to evenly distribute pressure across the forefoot, allowing your foot to relax.
We want you to ski better, to have the best setup possible! Thats why we give you 30 days to try our products. If they do not work for you, we will buy them back!
There will be some skiers that require specialized footbeds and custom bootwork to achieve comfort in their ski boots. Our ELITE footbeds can be custom heat molded to suit many challenging feet.
All you need to dial in the fit of your existing boots. Constantly developing and expanding the range of parts for fitting perfection. All done by you!